Freelancers : North Somerset

Category
Country
Region
City
Keyword

For Freelancers

  • Create an awesome portfolio to showcase your talent.
  • Rub elbows with the web's most talented freelancers.
  • Earn money doing what you love to do.
  • And much more...

For Employers

  • Post your freelance job in just 30 seconds. It's free!
  • Instant access to the web's most talented freelancers.
  • Hire an unlimited number of freelancers.
  • And much more...
 Freelancers 
 Portfolios 
 

Search Results

  Portfolios   Sort
Edgeways - Freelance Graphic Design & Brochure Design
7
Kudos
5.0
2 Skills
Ask
Rate/Hr
Edgeways is the home of Clevedon based graphic designer, Nicole Channon. Nic has more than seven years of professional industry experience (agency, in-house and freelance). Edgeways was founded with the aim of providing design support to small and medium size businesses, helping them get their message across and get a word in edgeways (see what I did there?!) Edgeways isn't a multi-national...
Clevedon, North Somerset, United Kingdom

More Freelancers

Stuart Edmondson - Freelance Journalistic Videography & Television Production
0
Kudos
5.0
2 Skills
$100
Rate/Hr
Broadcast TV - Produced over 100 half hour episodes of broadcast quality Action Sports TV content airing worldwide. Planet X and Xcorps TV series. Wrote, shot, edited and distributed journalistic format programing to broadcasters via satellite and more than 100 web video channels. Specialist in TV sponsor product branding and identity incorporated into broadcast format action sports and motor sports TV productions. Video for social media a specialty along with web distribution of short form video content. Also specialize in producing and distributing Music Video and Motor Sports TV content. Goal - Continue riding the CONTENT convergence WAVE!
Carlsbad, California, United States
Frank Olivier - Freelance Drafting & CAD
0
Kudos
5.0
2 Skills
$45
Rate/Hr
nr Mechanical, Structural Designer - Project Coordinator - Project Engineer • Professional offering over 24 years of experience ranging from Project Coordination to Design in Process Plants, Industrial Buildings and Mining • My Golden rule: To take the Imposable and meet the Project Design requirements keep it with in Schedule of the Process Plant Life Span, bring the Project Under Budget and meet all projects meets all OHS requirements. • On Site and Office Environment experience, working on Multi project and workloads and Proven ability to Cope with High Volume of Pressure. • Project Management and Proven skills in Result-Driven and Motivation and Team Leadership, with strong and Decisive Operations Leadership, Loyal and Professional, Ethical, Honest Excellent in Deceive Decision Making, Honest and Dependable. • Time Management, Planning and Scheduling of Workloads, Strong Communication and High Level of Problem Solving, Technical skills and Report Scope of works writing and Able to take on New Challenges. • A committed Team player, able to work as a Team member or on my own initiative with Minimum Supervision in a Office, Workshop Fabrication and Site Construction. • Pro-active, goal oriented with excellent attention to detail. Positive Attitude towards my Fellow works, Team focused, Problem Solving, Results and Objective Driven. • Commented to Organisation Providing Quality Service to Internal and External Clients and ongoing Personal skill and Development Training Program. • Drawing on my past Experance to Meet all Requirements to meet Technical Managemet and Drawing Office Procedures, the use of Project Standards and all required AS/NZ code for each discipline • Excellent customer focus and able to consistently meet client’s needs. • Effectively manages change to work tasks and the work environment, and assists others with adapting to change. • Able to identify issues, problems and opportunities; make timely decisions; develop appropriate and innovative solutions; and ask for assistance if required. • Excellent verbal and written communications skills, including the ability to convey information and ideas to individuals and groups, and make presentations when required. • Demonstrate initiative and a willingness to learn and continuously improve on performance. • Able to work effectively in small to large multi-disciplinary teams, and share and transfer knowledge within teams. • Creating work packs for large and small bore pipe; i.e. pipe supports, piping routes and required material take offs onsite or located in main office. The use of 3D models and P & ID’s and mechanical and structural steel layouts to complete a work packs. All piping routs are laid out to meet safe installation and keep cost down. Includes pipe spool length for safe installation. » Education Diploma of Business (Front Line Management) Associate Diploma in Civil Engineering Process Piping Design » Skills Applications Microsoft Project Professional Release 2013 Microsoft Office Professional all relevant software Microsoft Office SQL Server 2000 Database AutoCAD Release: Dos 12 to Win 2015 AutoCAD Advance Steel 2015 Autodesk MEP 2015 AutoCAD Revit Structure 2014 & 2015 AutoCAD Revit MEP 2014 & 2015 AutoCAD Navisworks 2009 to 2015 Auto plant 3D Piping series 5 & 6 Pro Cad Piping 2D /3D Smart 2010 Bentley Pro-Steel v8i select series 6 Bentley Auto Plant P & ID Auto Turn Release: 6.0 Micro Station v8i Bentley OpenPlant Modeler V8i » Work Experience Brightwater Engineering (Perth) Snr Mechanical Designer AutoCAD 2015, Navisworks Manage 2015 August 2014 - September 2014 Yarraville Slage Grinding Mill Project Contracted to bring the Project in Under Schedule and Under Cost with Good Engineering practice, 3D Design using AutoCAD and Navisworks to complete Design Reviews and Clash Detection. The design composed three sag mill feed chute feeding one conveyor. Two of the chute require chute to capture any steel fragments which will be picked up by two magnets. These to chute require to be directed away from the head chute to the recycle bins located on the floor level. Complete some miner back drafting 3D model was used to design check for clash detection and cut sections and elevation for detailing. All three chute composed of the same head chute and each discharge chute were design to meet the material flow rate on to the conveyor at a 9 degree angle. With Good Engineering practice and 3D design and Clash Detection the time spent kept the Project ahead of schedule. August 2013 - August 2014 Home renovations using AutoCAD and Navisworks software to complete a 3D models to complete design tiling, BBQ area and decking frame and decking boards, brick and carpentry work. Installation of two 5000l and 1100 l of rain water tanks and single water pump, which included the reticulation P & ID and piping layout including transfer pipework between main storage and operation tank, the design composed of using one pump to complete the following: use for reticulation and transfer of water. All designs included BIM for MTO take off to manage budgets and trade running (if required to complete any work) costing and shorten construction time down. Current working on the roof design to cover outdoor setting and BBQ area. All design meet required Drafting and Australian Standards and a complete set of design and construction drawings. June 2011 - August 2013 Ausenco Minerals & Metals Snr Mechanical Designer, Project Coordinator AutoCAD 2013, AutoCAD MEP 2013, Navisworks Manage 2013 & Pro- ProSteel June 2011 - June 2013 Kazakhmys Bozshakol Copper Project Working out of Perth to Project Coordinator Mumbai office taking a project which was at 30% complete and issuing it for 100% complete for construction over 16 months. Issue of drawing deliverables and tracing of all deliverables issued at different stages of the project, and tracking Hold Register, Vendor data. Running schedules on all drafting deliverables and man-hours on the design areas been worked on by the Mumbai Office. working with Multi disciplines on workloads, meeting schedules, budget hours and Strong Communication and High Level of Problem Solving, Computer Software followed the improving of Technical skills. Maintain a Positive Attitude into the working environment while working remotely, Keep the Team focused on the design, Problem Solving as problems come to hand. Planning, directing, coordinating and managing the activities design, personal groups assigned to small battery limits. Project coordination of multi-disciplinary project teams, and progress reporting. Reviewing engineering and design schedules, man-hour budgets and controls. Project meets technical documentation such as specifications, flow diagrams and plot plans. Monitoring multi-disciplinary designers progress on assigned project. Assuring compliance of engineering effort to project schedule, Weekly project update to company management and owners. Working alongside Perth and Mumbai designers on a Reclaim Tunnel design and Copper Concentrate load out building, to complete 3d models to extract 2d drawings. Working alongside Designers and Snr. Engineers to meet the schedule. Insuring that all design work meets required Project and Australian Standards, and meet budget requirements, Detail up drawings for elevations & section drawings, extraction fans inlet and outlet connection and conveyor systems layouts located under collectors and changing design by drawing up a and 3d model on the process system. The extraction of 2D layouts from the 3D models “HVAC, piping, mechanical equipment and air and electrical cable trays” for shop fabrication drawing and bill of materials. Inputs came from existing Engineering manual drawing and site sketches, and 3D modelling from clash detection software. The Checking of pipe supports, access platforms, stairs ladders and HVAC and all new conveyors, bins and cutes and managing progress drawings, which included piping, HVAC duct drawings, batch hoppers, material take offs and all project drawings for the release for construction. Using life 3d models plate work, steel work to generate 2d layouts, Plans, Sections and Elevations in Pro-Steel 2D section for design and vendor issue. This includes working with Mechanical and Pro-Steel Engineers to complete design and include changes. Using Navisworks to complete Design Reviews and clash detection for all disciplines and changing the design meets the project design and standards. The issue for match up images to design personal to incorporate design, clash detection or new vendor/suppler data. Reviewing of all Pro-Steel , piping mechanical design i.e. conveyors, transfer station and piping system, pipe racks and foundations to support (concrete) checking of piping system to meet P&ID’s. Checking of work packages and marking up information and returning for update and issue under the current revision. Weekly update and drafting deliverables and progress reporting. Updating cad systems and supporting personal in the use of pro-steel. The use of Pro-Steel to give live design changes but plate work and steel MTO’s. Ausenco Mumbai – India Tucano Gold Mine Working out of Mumbai office taking a project which was at 15% complete and issuing it for 100% complete for construction over 6 months. Working with Perth and Mumbai designers, drafters and Snr. Engineers to meet the schedule. Weekly update and drafting deliverables and progress reporting. Checking of all Pro-Steel design i.e. conveyors, transfer station and piping system, pipe racks and foundations to support (concrete) checking of piping system to meet P&ID’s and piping isometric’s. Using life 3d models plate work, steel work to create layout, sections elevations in Pro Pro-Steel Auto-plant to create life 2D section for design and vendor issue. Weekly update on Project Design and drafting deliverables and progress reporting Using of Naviswork 2013 for clash detection , design review and design progress and vendor data review. Updating cad systems and supporting personal in the use of Pro-Steel and Auto Plant. The use of Pro-Steel to give live design changes but plate work and steel MTO’s. Drawing on past Experance to help with Training Engineers and Draftsmen to meet Australia Standards and Document Control Procedures. Intrudes a Positive Attitude into the working environment, Maintain Team focused on the design, Problem Solving as problems come to hand. Planning, directing, coordinating and managing the activities design, personal groups assigned to small battery limits. Project coordination of multi-disciplinary project teams, and progress reporting. Reviewing engineering and design schedules, man-hour budgets and controls. Project meets technical documentation such as specifications, flow diagrams and plot plans. Monitoring multi-disciplinary designers progress on assigned project. Assuring compliance of engineering effort to project schedule, Weekly project update to company management and owners. Setting up the next process data transfer and design process to meet all project and design process to be issued to Ausenco Mumbai, Remote Office (Mumbai) experience back to Perth , working with Multi disciplines on workloads, meeting schedules, budget hours and Strong Communication and High Level of Problem Solving, Computer Software followed the improving of Technical skills Projects: Kazakhmys Bozshakol Copper Project (1.9 Billion) Bozshakol Clay Project study (120 million) Tucano Gold Mine (110 million) Matrix Composites & Engineering Snr Mechanical Draftsmen & Project Engineer AutoCAD 2009, AutoCAD MEP 2010, Navisworks Manage 2010, Pro-CAD 3D Smart & Pro-Steel May 2010 – May 2011 At Henderson feasibility Design layouts of piping systems stainless steel tube and Sch 80 pressure process systems and Pro-Steel platforms, and plant access , pipe systems and conveyor bridge linking to storage silo’s. Using of Navisworks for clash, design review and design progress for vendor data review and work progress complete. Responsible for preparing and reviewing, design drawings and other information. Supports construction and procurement with preparation of drawings and material take offs. Reviews drawings and assists with collection of design information required by construction and procurement. Incorporating engineering practices, design details, international codes and standards, procedures and specifications. Directly involved with development, enhancement and maintenance of 3D graphic visual display and modelling work. 3D modelling of new plant, detail pipe & tube layouts, isometrics a Pro-Steel drawings on elevations & section drawings, design 3d model on the high pressure process system. 3D Model layout on high pressure process and all steel work and high presses pipe and tube feed conveyor systems, and piping system covered oil and resin. Design layouts of process and Pro-Steel working platforms, pipe/conveyor Bridge. Checking of vender deign and drawings piping and tubing and Pro-Steel steel drawings, material take offs for construction. This includes checking P&ID’s, Plant layout, 3D modeling of the plant and Pipe work using 3D SMART Procad pipe. Using Prosteel to 3D Model all steel layouts to complete pipe & tube runs and tube feed conveyors. Using Naviswork 2010for design review and clash detection Overseeing the Fabrication and Installation and of all low pressure Tube system (900kPa) process room and high pressure piping (sch80 RTJ valves /flanges) system (1700kPa) piping in the main process building. Coordinating work packages and the writing up work area scope of work and review proposal packages. Fabrication of 8 off, 60 000liter storage tanks and installation. Writing up tender documents to the high and low pressure process and steel platforms, walk ways for fabrication. While meeting project schedules, and procure tube, valve and fittings. While under construction working with tube and high pressure pipe fitter and boiler makers. Following up on steel fabricator and equipment installers. Updating and meeting project schedule and completing work before schedule outlined. Any design changes met strict process to stay within piping P & ID’s with approval from process engineer and project manager. Responsible for scoping, planning, directing, coordinating and managing the activities design, site installation personal groups assigned to small battery limits. Estimating of piping, Pro-Steel and tanks to let contracts for fabrication, project coordination of multi-disciplinary project teams, and progress reporting. Developing a definition of the scope of engineering services to be provided by the company. Reviewing engineering and design schedules, man-hour budgets and controls. Approving all project technical documentation such as specifications, flow diagrams and plot plans. Monitoring engineering expenditures and progress on assigned project. Assuring compliance of engineering effort to project schedule, control estimates and company procedures. Weekly project update to company management and owners. Commissioning Engineer Overseeing construction process to meet client design and process design and that plant meet Australia standards from a construction, commission and maintenance while under production. Checking of all vendor data and checking all design data to all process data before any commissioning takes place. Checking and all pipe lines, fixing and confirming it meets the design process. Training site personal once the plant is commission has taken place after the first 100 hours. Project: New facility in Henderson ($ 32 Million) Tiwest Joint Venture Snr Mechanical Designer AutoCAD R 2009, AutoCAD MEP 2010, Navisworks Manage 2010 & Pro-Steel April 2009 – April 2010 On site Chandala for the design RI recovery operation and conveyor to replace of existing RI recovery hopper and conveyor. This included accessing existing building and road way and existing drainage. The design included mechanical layout front end loader access to 40t hopper and new conveyer. Updating of Process Flow Diagrams and Piping and Instrumentation Diagram, site plan update and generate a set of mechanical layout and section drawings to match design change. The design included Hopper design, concrete bunker and conveyor with tail and head chute feeding into 8” (203mm sch80) pipe work and isolation valves into a hot bin with bypass system to feed into conveyor system. Civil layout for conveyor and hopper drawing for foundations. Checking and red lining of design drawings for the following disciplines, Mechanical, Pro-Steel , Piping and civil Drawings for 23klt Activated Carbon Process and re-issuing back to EPCM. This included checking design of two existing Pro-Steel , pipe work and location of mechanical equipment’ i.e. conveyor head and trail chutes, Pro-Steel and piping levels’. Layout on a 54 meter long x 35meter wide Activated Carbon storage shed to access with B-trains and forklifts. Design included B-train turning circles and drainage to the building. At Kwinana feasibility study Design layouts of process to introduce Lime process to replace existing Limestone process in area 600. Tanks, pumps, hopper and conveyor. Updating Lime PFD & P &ID’s to include into lime stone into existing Lime process. Plant layout to include storage tanks, conveyor and low level feeder including pump layouts. Included in the design for front end loader, semi-trailer turning circles. Pro-Steel stairway, working platform and ladder access to tanks and actuators. Mechanical feed hopper, discharge chute and pipe layouts for pumps. Project: Kwinana Feasibility Project (Congo) (5.5 Million) Chandala RI Recovery ($ 25 Million) Ausenco Minerals & Metals Snr Mechanical Designer Draftsmen AutoCAD R 2008. October 2008 – November 2008 Design layout of process Tanks, pumps and CCd’s to match PFD process and size of equipment match data sheets. By producing plan, elevation and section drawings for design review for costing. Process plant layout for the following process areas Copper leach circuit, CCD thickeners, Reflux thickening and clarification, cobalt leaching circuit Sulphur dioxide absorption process. Checking of layouts on each battery limit to make sure all piping and Pro-Steel will be located in the right location once we move into detail design in the all areas. All drawing meet the required drawing office procedures to meet all required AS/NZ codes. Project: Mutanda Copper Project (Congo) ($ 1.1 Billion) Worley Parsons Hydrocodone’s Snr Piping Designer – AutoCAD R2005 – Auto Plant 3D Piping & Pro-Steel June 2008 – October 2008 3D modelling of current and future plant, detail pipe layouts, isometrics a Pro-Steel drawings on elevations & section drawings, design 3d model on the process system. Checking of drawings piping, Pro-Steel steel drawings, material take offs for construction. This includes checking P&ID’s , Plant layout, 3D modeling of the plant and Pipe work using Autoplant. Using Prosteel to locate existing and future steel layouts to complete pipe runs. Checking all pipe routing, Material take off and Item listings and all drawing meet the required drawing office procedures including all AS/NZ codes. On site checking piping routes and structral pipe supports, rack, including civil works for new designs. Project: BP refinery Kwinana ($ 11 Million) Bateman Engineering Lead Designer – AutoCAD R 2005 – Auto Plant 3D, Pro Pro-Steel . June 2007 – June 2008 Responsible for scoping, planning, directing, coordinating and managing the activities design, site installation personal groups assigned to small battery limits. Estimating of piping, Pro-Steel and tanks to let contracts for fabrication, project coordination of multi-disciplinary project teams, and progress reporting. Developing a definition of the scope of engineering services to be provided by the company. Reviewing engineering and design schedules, man-hour budgets and controls. Approving all project technical documentation such as specifications, flow diagrams and plot plans. Monitoring engineering expenditures and progress on assigned project. Assuring compliance of engineering effort to project schedule, control estimates and company procedures. P & ID, PFD & 3D model, detail pipe, civil & Pro-Steel drawings on details, elevations & section drawings, design 3d model on the process system. Working with alongside designers, drafters and Snr Engineers to meet the schedule. Weekly update and drafting deliverables and progress reporting. Using life 3d models plate work, steel work to create layout, sections elevations in Pro-Steel Auto-plant to create life 2D section for design and vendor issue. Checking of all Pro-Steel design i.e. conveyors, transfer station and piping system, pipe racks and foundations to support (concrete) checking of piping system to meet P&ID’s and piping isometric’s. Using of Navisworks for clash, design review and design progress and vendor data review. Managing all progress, included piping, Pro-Steel steel drawings, material take offs and all project civil drawings for the release for construction. This includes checking P&ID’s , Plant layout, 3D modeling of the plant and Pipe and ProSteel work using Autoplant pipe and prosteel. Checking all pipe routing and material spec’s, including all ProSteel steel plate (Prosteel) between crushing and grinding and overland convoyer to the leach pad . ProSteel for the pipe racks, CCD’s tanks pipe supports and access platforms and all drawing meet all drawing procedures and meet all required AS/NZ code on each discipline, stairs. Checking all Material take off’s and Item listings. On site civil works construction and design, checking of levels. Setting up of AutoCAD Menu systems Title blocks, plot styles. Including a adding a continuous improvement plan in maintain Cad systems, Auto plant and drawing office procedures to meet all required AS/NZ code on each discipline. Project: Muliashi Copper Project ZAB710 (Zambia) ($1.25 Billion) HPS Environmental Enerflex Lead Draftsmen – AutoCAD R 2005 - Micro Station V8 August 2006 – June 2007 Manage of drawings schedules for Design of water and clean & dirty air extraction system, drawings P & ID, Isometrics and PFD, detail pipe drawings on elevations & section drawings, extraction fans inlet and outlet connection and conveyor systems layouts located under collectors and changing design by drawing up a and 3d model on the process system. The extraction of 2D layouts from the 3D models “HVAC, piping, mechanical equipment and air and electrical cable trays” for shop fabrication drawing and bill of materials. Inputs came from existing Engineering manual drawing and site sketches, and 3D modelling from clash detection software. The Checking of pipe supports, access platforms, stairs ladders and HVAC and all new conveyors, bins and cutes and managing progress all HPS drawing office and contractor drawings, which included piping, steel duct, Pro-Steel drawings, batch hoppers, material take offs and all project drawings for the release for construction. Setting up of AutoCAD Menu systems Title blocks, plot styles. Including a adding a continuous improvement plan in maintain Cad systems and drawing office procedures to meet all required AS/NZ codes and disciplines. Project: Tom Price DCB upgrade ($ 1.5 Million) BHP Mining Area C ($ 12 Million) BHP Yandi Expansion Project ($ 10 Million) Wesfarmers Kleenheat Gas Drawing Office Supervisor/CADD Manager AutoCAD 12 - 2007 July 1995 – August 2006 Design of Major Storage Facility, Automotive gas (autogas), Industrial and Commercial LPG installations. A thorough Knowledge on the required AS/NZ codes for the Design of LPG / LNG gas installations and storage felicities and maintaining a high level of safety at all times in the design process. Participate in design reviews, advice on technical design and drafting issues and compliance requirements as appropriate. Working alone side and overseeing all designs drawings from sketches, notes, plans, piping specifications to produce accepted designs for best practice and company process. Checking of all site layouts, in piping and routs, structure supports, ladders, stairs and cylinder storage platforms including material take offs. For the all LPG /LNG installations “bulk storage, road transport, fuel stations and industrial installations around Australia. To make sure all Australia standards (AS/NZ code s) are met. 2D in piping and civil layouts and designs including transferring 2D design to a 3D modelling to review design, when required. Piping layouts on plot plans, process equipment, and piping systems including (pump sets, compressors, vaporizers, boilers, pressure regulators, and pressure vessels, unload and load facilities). Detail design on mechanical equipment, drawing up of P & ID’s and producing piping designs and layouts from P & ID’s, material takeoffs. Checking of drawing to meet all require to local Government and Australia standards to meet the installation and operation process. Setting up of AutoCAD Menu systems (drop down menu, tool bars, dynamic blocks) to include the following Autogas, Industrial, Commercial, Standard symbols, LPG & LNG facilities, LPG & LNG P & ID’s, 2D and 3D piping fittings, fire protection systems, Gas reticulation systems, Pressure vessel layouts, Title blocks, steel sections and details. All blocks – symbols to transfer data to a database to extract material list from drawings. Including a adding a continuous improvement plan in maintain Cad systems and drawing office procedures to meet all required code and disciplines. Implementation setting a Drawing and GIS registers and numbering system to work from an intranet system to record, view, AutoCAD, AutoCAD Volo View drawings, PDF Documents (Projects, Road Tanker Records and LPG and LNG facility Specifications and documents), including MapInfo Maps, Gas reticulation systems and analyst maps. Rolling out of using AutoCAD Volo View and MapInfo Pro viewer to view drawings and maps thorough out Australia. Implementation of AutoCAD Map and MapInfo GIS software for company gas reticulations systems and analyst maps. Setting up an operating system, procedures and standards to meet company procedures and compliance. Projects: Current Projects Nowra Gas Storage Facility – Nowra (N.S.W) ($ 1.25 Million) Proposed LNG Heavy Vehicle Refuelling ($ 1.75 Million) LPG Projects: 1994 – 2006 Project Manage office building maintains – Murdoch office (W.A) ($ 20 Thousand) Project Manage office building maintains – Myaree office (W.A) ($ 10 Thousand) Armidale Gas Storage Facility (Mott St) – Armidale (N.S.W) ($ 1.5 Million) Swan Hill Gas Storage Facility - (S.A) ($ 75 Thousand) Bulwer Island Gas Storage Facility - Pinkenba (QLD) ($ 3.5 Million) Darwin (Winnellie) Gas Storage Facility - (N.T) ($ 1.1 Million) Kwinana Gas Storage Facility - (S.A) ($ 75 Thousand) Bangladesh Gas Import Storage Facility - Port Mongla - Dhaka($ 35 Million) Bulls Brook Gas Storage Facility – Upper Swan (W.A) ($ 1.2 Million) Bulwer Island Gas Storage Facility - Pinkenba (QLD) ($ 1.1 Million) Adelaide Gas Storage Facility – Winfield (S.A) ($ 1.2 Million) LPG Road Tankers Redesign ($ 20 Thousand) LNG Projects: 2000 - 2007 Armidale Gas Storage Facility (Mott St) – Armidale (N.S.W) ($ 3.5 Million) LNG Road Tankers Design (LNG-101) ($ 50 Thousand) Sands Transport - (W.A) ($ 100 Thousand ) Mitchell Transport - (W.A) ($ 90 Thousand) Deer Park - (VIC) ($ 1.5 Million) Murray Goulburn - (VIC) ($ 1.2 Million) Connell Wagner P/L Contractor ProSteel Draftsmen – AutoCAD R 12 July 1994 – August 1994 As build drawings on foundation layouts, ProSteel steel walk way updates. Project: Coflexip Asia Pacific CMS Construction P/L Contractor Estimator (Civil) May 1994 – July 1994 Estimating from Engineering and Architectural which included drawings costs on concrete, formwork, man hours, etc. Projects: BHP: Cockatoo Island Iron Ore Project Alcoa: Substations and Switch rooms CSBP: Granulation plant T & Z Architects P/L Contractor Cad/Draftsmen – AutoCAD R 12 May 1994 Project: Submarine Trainee facility (Naval Base, W.A) Transfer of manual drawings into AutoCAD. Lenny’s Commercial Kitchens Estimator / Draftsmen September 1993 – April 1994 Estimating from Engineering and Architectural which included drawings costs on floor plans for Bars and Restaurants. Planning and tracking of projects implementing workload and project register, weekly progress reports, and multi project tasking. Material takeoffs and costing on stainless steel bench tops, Kitchens appliances, food display. Backpacking though Europe on Holiday April 1993 – September 1993 Main Roads Department Carlisle, Perth W.A Contractor Civil Draftsmen AutoCAD R 11 January 1992 – August 1992 As Builds on Industrial and Commercial crossovers and drainage details. Design and details construction drawings in 2D and 3D drawings of Compensation Basin on the Token freeway. Including all sections and detail. Following up on accidents reports for the Mitchell Freeway. Progress reports on the raster transfer of Kings Park to AutoCAD. Projects: Kings Park drawing transfer Token freeway Compensation Basin Hydrocarbon Recovery Techniques Piping Designer AutoCAD R 11 January 1992 – August 1992 Process Design layouts and pipe fabrication drawings including pipe supports on oil recover units. Piping design sketches, plans, specifications and suppler data. Design skid mounted pumps and heat exchanges to be transportation. Drawing up 3D modules on plant layout on equipment. Linde AG Piping Designer AutoCAD R 11 September 1991 – November 1992 Process Design piping layouts and pipe isometrics drawings including material take offs. Overseeing of piping design and detail drawings from sketches, notes, plans, designs, specifications and data. Drawing detail design from P & ID’s and producing piping layouts. Drawing up 3D module on stage 3 plant, Moss Gas layout and equipment. Pressure Vessel detail sections and design (pump sets, compressors, boilers and load facilities). Bill of material take offs on piping systems and ProSteel steel. Setting up of Drawing register and document control system. Projects: SASOL 3 Moss Gas (60) Fuel Tanks and Pressure Storage Spheres United Construction P/L Piping Designer April 1991 – August 1991 Pipe materials take offs for Stainless and Carbon piping isometrics for shop fabrication. Setting up of recording of weld heat numbers and running fabrication reports. Issuing of working and releasing materials for fabrication. Maintaining records on pipe spools/isometric design variations and the recover of pipe fittings. Including keeping up to date with all the required specifications and progress reports. Planning and tracking of work load and all material use on project, weekly progress reports. Projects: North West Shelf Stage 3 Tub Bridge Gas Field Development Pinjar Gas Turbine Station Stage 3 Phillips Engineering P/L Henderson W.A Estimator April 1988 – August 1991 Estimating from Engineering and Architectural which included drawings costs on process plants and mining sits. Material take offs on chutes, conveyers, tanks, ProSteel steel and piping. Monitoring of fabrication of components, welding procedures and checking of ProSteel . Projects: Ocean Shipyards (workshop extensions) Mineral Sands St Ives Gold Mine United Construction P/L Contractor Project Pipe Designer & Scheduler January 1987 – May 1988 Manual drafting on revised piping isometrics and document control on Post weld heat treatment (PWHT) including NDT records. Pipe materials take offs for Stainless and Carbon piping isometrics for shop fabrication. Setting up of recording of weld heat numbers and running fabrication reports. Issuing of working and releasing materials for fabrication. Maintaining records on pipe spools/isometric design variations and the recover of pipe fittings. Including keeping up to date with all the required specifications and progress reports. Onsite running of Gantt charts, planning and tracking of project weekly progress reports on multi projects. Projects: North West Shelf Stage 2 North West Shelf Stage 2 (Domgas) December 1986 - Emigrated to Australia » Interest Landscape Photographic, gardening, carpentry, Sailing.
Perth, Western Australia, Australia
David Mitzel - Freelance CAD & Drafting
0
Kudos
5.0
2 Skills
Ask
Rate/Hr
13 years Computer Aided Design and Drafting experience utilizing AutoCAD, Solid Works, and Inventor to create 3D solid parts, assemblies, and generate detailed drawings of automatic or manually controlled plumbing systems for high purity gases and chemical processes, formed and welded sheet metal and plastic enclosures, support brackets, CNC machined parts, structural steel support weldments, and electrical controllers. Create conceptual P & ID and electrical drawings as basis for complex assembly designs for RFQ submittals and customer approvals, research and select all parts and materials, generate complete Bill of Materials documentation for purchase and complete drawing package release for fabrication by manufacturing floor, outside vendors, end customers, or onsite facility contractors. Working knowledge of ANSI and ISO Drafting Standards, Welding Symbols, Geometric Dimensioning and Tolerancing – ASME Y14.5M-1994, Manufacturing and Machine Shop practices, Hazardous location classifications and NEMA ratings for enclosures, and UL and CE rated components. Excellent ability to work as part of a Project Team assigned tasks to complete and as equally strong becoming the Project Team Leader generating the schedule and assigning tasks to maintain adherence to Project scope. Excellent communication, interpersonal, and organizational skills. Education A.A.S. Engineering Design & Graphics Degree, June 1997 Linn Benton Community College Albany, OR A.A. Transfer Degree, Central Oregon Community College Bend, OR Career History Nuance Systems, Inc Portland, OR Aug 2010-Oct 2011 Plumbing/Mechanical CAD Designer (Contract position) Maintained all engineering documents for all products built per customer requirements and created new product versions per customer purchase order. Designed 3D Solid Model Assemblies of High Purity Gas, Solvent, and Chemical Distribution Cabinets, VMB's, Supply skids, and Electro-Mechanical Systems. Utilized AutoCAD 2011-2012 to produce 3D solid model parts and assemblies and create complete fabrication drawing packages. Responsible for research, selection, and implementation into designs of all mechanical, pneumatic, or hydraulic parts; including pressure, temperature, flow and load sensors or switches. Concept Systems, Inc Albany, OR Oct 2005-Sep 2008 Electrical Controls Designer/Drafter Use AutoCAD Electrical 2007 thru 2009 to design and draft electrical controls drawing packages including: power distribution, PLC, VFD, and HMI enclosures, junction boxes, and control stations. Use engineer provided bill of materials and rough layouts to generate a complete print package that follows either company or customer set standards. Use SolidWorks 2006 to create parts, assemblies and detailed drawings when required by in house engineers or customers for projects. Process Tube Systems, Inc Wilsonville, OR Sep 1999-Oct 2005 Design Team Manager Designed 3D Solid Model Assemblies of High Purity Gas, Solvent, and Chemical Distribution Cabinets, VMB's, Supply skids, and Analytical systems. Utilized AutoCAD 2004 and Pro/Engineer 2000i² to produce 3D solid model parts and assemblies for fabrication drawing packages. Responsible for research, selection, and implementation into designs of all mechanical, pneumatic, or hydraulic parts; including pressure, temperature, flow and load sensors or switches. Perform Field Engineering duties to support in house sales and marketing and help to ensure that all of the customer’s product specifications, needs, and expectations are always met. Trained and Managed Engineering Designers and Drafters, Redlined and reviewed all designers drawing packages for adherence to ANSI and Company standards and manufacturing practices. Safari Motor Coaches Harrisburg, OR April 98 - Sep 99 Design Engineer Created 3D AutoCAD 2000 solid models from all original 2D drawings and drafted new 3D drawings for each entire Coach Model type. Created ECO forms, updated BOM and issued revised drawings to manufacturing Worked in conjunction with engineering team to support all manufacturing departments and help maintain and ensure customer satisfaction through production of a quality coach. Communicated and coordinated with other SMC companies engineering departments statewide to maintain company and CSA standards. Verteq Systems Automation, Corvallis, OR July 97 - April 98 Design Support Engineer Designed and Drafted AutoCAD 3D Plumbing and Mechanical assemblies of Semiconductor Wet Benches. Created detailed 2D drawing packages from AutoCAD 3D solid assemblies for manufacturing. Maintained and revised all existing AutoCAD 3D solid models for all company products. Worked with Engineers, Marketing, and Manufacturing in Product development teams to maintain and improve on existing product designs, as well as develop future concepts Software used AutoCAD releases 12 – 2012, AutoCAD Electrical 2006-2007, SolidWorks 2005-2006, Inventor 8.0, and Pro/E 2000 and 2000i². Working knowledge of AutoCAD Autolisp Customization and file transfer setup for .stp, .iges, .sat, and AutoCAD .dxf and .dwf file extensions. Microsoft Office 2000-2007 Excel, Word, Outlook, and Windows NT 4.0, 2000, XP Professional and Windows 7 Professional operating systems. Adobe Acrobat X (10.0) PDF Writer & Reader, Illustrator 9.0, and Photoshop 7.0
Corvallis, Oregon, United States
Zach Rogers - Freelance Writing & Flyer Design
8
Kudos
4.0
2 Skills
Ask
Rate/Hr
There may be a million writers and designers out there, but many lack the unconventionality, and principle that one such as myself possess. I need not run anything into an immediate declination, and I need not over achieve, because I do the right job, the first time.
Loganville, Georgia, United States
Christine Scherer - Freelance Editing & Proofreading
0
Kudos
5.0
2 Skills
Ask
Rate/Hr
CHRISTINE M. SCHERER 1203 Miniature Court Rochester Hills, MI 48307 Home: (248) 608-4453 Cell: (810) 471-8490 chris_scherer16@hotmail.com Educator with 20 years of proofreading, editing, and management experience and a Master of Arts degree in English Composition and Rhetoric seeks position. SUMMARY OF QUALIFICATIONS •Exceptional written and verbal communication skills •Outstanding proofreading skills •Familiar with APA, MLA, and Chicago styles •Proven record of excellence in project management •Adept at working collaboratively or individually •Skilled in assessing clients’ needs and adapting to meet those needs •Knowledgeable about current research in composition and rhetoric theory PROFESSIONAL EXPERIENCE ADJUNCT ENGLISH INSTRUCTOR 2010-present MACOMB COMMUNITY COLLEGE MACOMB COUNTY, MI •Instructed adult learners in grammar, writing, and academic research •Created instructional materials to meet the needs of traditional and non-traditional students •Taught courses ranging from remedial to advanced levels •Edited and proofread students’ writing •Collaborated with other instructors to improve standards and assessments •Incorporated social media into classroom instruction LANGUAGE ARTS TEACHER 1991-2008 WATERFORD SCHOOL DISTRICT WATERFORD, MI •Recognized as the go-to person for questions regarding grammar and proofreading •Taught language and writing skills to students at every level of the learning spectrum •Collaborated with colleagues to identify and implement best practices •Produced written communication materials for department and district purposes •Instructed teachers in methodologies for cross-curriculum writing •Developed curriculum using instructional design that encompasses scope and sequence •Created curriculum and assessment tools that address various learning styles for young learners and for adult learners •Managed multiple short and long term projects to successful completion •Participated as both a member and a leader of various project teams for the Waterford School District and the State of Michigan •Collaborated with fellow teachers in team-teaching programs including cross-curriculum and special education inclusion teaching •Published research in the Literacy Consortium Journal in conjunction with the Michigan English Language Arts Project and the Michigan Council of Teachers of English •Presented staff development programs in both content and instructional strategies •Established and maintained positive relationships with students, parents, and colleagues •Mentored three student teachers and two novice teachers •Demonstrated leadership while serving as facilitator for the Student Assistance and Family Education program and the Positive Peer Influence program •Managed grant funding and reporting associated with the Student Assistance and Family Education program •Coordinated seminars and workshops for student facilitators in the Positive Peer Influence program •Selected as a participant in the district’s Reflective Practitioner pilot program GRANT CONSULTANT 1989-1991 GRANTSLINE FLINT, MI •Proofread and edited grant proposals, marketing materials, and corporate communications •Created curriculum and assessment tools for seminars on grant writing •Taught seminars in grant research, application, and creation •Assisted clients in compiling data and documents needed for grant applications •Produced a variety of successfully funded grant proposals •Researched grant availability and requirements •Managed simultaneous projects •Delivered projects on deadline •Collaborated with other consultants to determine clients’ needs •Developed boiler-plate text for multiple purposes •Created corporate marketing materials including newsletters and internal documents EDUCATION AND TRAINING MASTER OF ARTS-ENGLISH LANGUAGE AND LITERATURE CONCENTRATION-COMPOSITION AND RHETORIC 2010 UNIVERSITY OF MICHIGAN-FLINT FLINT, MI BACHELOR OF ARTS-ENGLISH TEACHING CERTIFICATION 1989 UNIVERSITY OF MICHIGAN-FLINT FLINT, MI ASSOCIATES DEGREE-MERCHANDISING/MARKETING 1977 BAKER COLLEGE FLINT, MI ADDITIONAL COURSE WORK •Marygrove College-Graduate courses in the Masters in the Art of Teaching program •University of Michigan-Graduate courses in the Masters in American Culture program •Oakland Schools-North Oakland Writing Project (two sessions) •William Glasser Choice Theory of Management •7 Habits of Highly Effective People •7 Habits of Highly Effective Teens •Peer Mediation Training •Microsoft Word, Excel, Power point, Grade Quick, Blackboard (online learning system), Angel (online learning system) REFERENCES AVAILABLE UPON REQUEST
Rochester, Michigan, United States
Tyler Yeadon - Freelance Blog Writing & Fiction Writing
0
Kudos
4.0
2 Skills
Ask
Rate/Hr
Hello I am Tyler. I recently decided to be a professional freelance writer after getting out of high school. I have always enjoyed writing, but I have never ventured into getting payed for it. I believe anyone can be a writer and everyone has a bit of writing potential within themselves. I am simply putting mine to use and trying to make enough to live.
Marienthal, Kansas, United States
Abdul - Freelance Arabic Translation & Language Translation
0
Kudos
3.0
2 Skills
Ask
Rate/Hr
Dear sir/madam, I have read through your job description for on, and I believe my skills and experience will suit this role. Please find my CV attached. I would like to thank you for taking the time to review my application and hope to hear from you soon. Yours sincerely
Huddersfield, United Kingdom
Shalini Sharma - Freelance International Marketing & Office Management
0
Kudos
5.0
2 Skills
$45
Rate/Hr
shalinimanandhar@yahoo.com More than 10 years of experience as an expert in communication and MIS, policy formulation, capacity development, strategic planning, general administration, procurement, accounting, marketing and business planning, and promotion. Significant office management experience gained from various positions. Worked for Canadian based NGO and managed and monitored accounts and contracts for a range of projects. Deeply involved in business development of Chemonics International, a US based development consulting organization. Strong computing and written and verbal communication skills.
Brampton, Ontario, Canada
Naveein - Freelance Website Design & Graphic Design
0
Kudos
5.0
2 Skills
Ask
Rate/Hr
Freelance Designer with a Masters degree and four years experience in the field of animation and graphic design including 3D & 2D animation, web design and user interface design. My expertise includes Web Design and Development, Advertisement and Video Production. I am a fun loving and energetic person, spend most of my free time in the gym keeping myself fit and love to go on bush walking, watch movies and play video games.
Melbourne, Victoria, Australia