Earl james

Freelance CAD Freelancer & Engineer

1641
Location:New Brunswick, New Jersey, United States
Profile:https://www.freelanced.com/earljames
1
Kudos
3.0
2 Skills
Ask
Rate/Hr
EARL JAMES

OBJECTIVE: To work for a company with growth potential that will enhance my
Engineering, Designing, CAD and Supervisory Abilities

EXPERIENCE:

THE RIGHT CONNECTION CONTRACTORS (MEP) 36-36 23rd Street, Long Island City
2010-Present
DREAM DOWNTOWN (Luxury, Hotel on 349 West 17th, Street New York, N.Y, Construction Site)
Senior AutoCAD 2009, 10 & 2011 on site AutoCAD Designer,
Worked on Shop Drawings, Elevations of HVAC Equipment Using Submittals from the Engineering Dept. and field information.
Made As-built Drawings of Existing work on various floors.
Made on the job field Structural Drawings for Elevations of Ductwork, Plumbing, Sprinkler Piping, and Electrical Conduits To insure proper Elevations from finish floors to bottom of slabs by using the InteliCAD Program, and taking field measurements.
Worked on the Job Site with Steamfitters, Hanging Ductwork, installing Heat Pumps and connecting HWS/R, CWS/R and Condensate lines to the units from the main lines. Fire Proofing Ductwork Fire Wrap, Fire Stop & Insulating both Ductwork and Piping on floors and on the roof tops.
Assembled Exhaust fans and connect oil pipe lines on roof tops.
Revised Building Department Revisions and Notes on Drawings.
Supervised workers in completing Fire Wrapping and Fire Stopping on all 17 floors.

GENESYS ENGINEERING P.C
Westchester County, NY.
2008-2009
Senior AutoCAD Operator/HVAC /Piping
Worked on Job site on HVAC Units revising Ductwork and piping locations.
Review and check Shop Drawings, field work and As Built drawings
Responsible for revising and updating current drawings for new Air Handling
Units and new layouts for Ductwork in the Mechanical rooms on the campus.
Worked on various project for clients such as Stony Brook/Queens College and City
College N.Y.

JB&B CONSULTING ENGINEERS New York, NY
Senior AutoCAD/HVAC Designer 2005 - 2008
Drafting red line markups and cleaning up Architectural backgrounds and PDF drawings
Conduction job site visits, as-built drawings
Responsible for revising duct sizes and layouts of ductwork from existing base building
ductwork
I’ve worked on various project such as the New World Trade Center Project (Towers #2
and # 3) and The Twin Towers
Full knowledge of AutoCAD 2007 & 2008

BURO HAPPOID CONSULTING ENGINEERS New York, NY
Senior CAD Operator / Designer 2005 - 2005 (Contract Employee)
Responsible for HVAC and Electrical Drawings on various Projects to meet several
deadlines

Proficient in AutoCAD 2005

URS CORPORATION Wayne, NJ
Senior CAD Operator / Design 2001 - 2005
Responsible for designing work on various County’s Highways and highway structures
using Micro Station 7 and AutoCAD 2000 in the Transportation and HVAC Department
at URS
Worked on Construction plans, Traffic signing and striping plans, Drainage and Utility
plans, Traffic Control and Staging plans, Electrical plans, Environmental plans and
Typical Sections
My two main projects at URS were the new County Road and Route 46. where I worked
on all phases of the projects side by side with the Project Managers

EARL JAMES Page 2

CONCESSI CONSULTING ENGINEERS, P.C. New York, NY
HVAC Electrical Designer 1998 - 2001
Conducted Job site surveys (visits) of building for redesigning of existing ductwork,
HVAC Systems, plumbing, sprinkler and electrical and fire protection
Designed floor plans from Architects using AutoCAD 14 and AutoCAD 2000 with the
use of Microsoft Office and Carrier Calculation spreadsheets
Proficient in AutoCAD 12, 13, 14 and 2000
Knowledge of HVAC, Plumbing, Sprinkler and Electrical design work
My various projects included The MetLife Building, The Forbes Building, The
Woolworth Building; SCA Projects (New York City Schools) and The Ross Institute
Center for Well Being - East Hampton, NJ
WANK ADAMS SLAVIN ASSOCIATES (WASA) New York, NY
HVAC Designer 1995 - 1998
Responsible for job survey of existing buildings and the redesigning of ductwork from
selected HVAC units using AARIS CAD
Worked on various job sites and projects with clients such as Century 21, New York
University, Hudson News – Newark, NJ and The United Cerebral Palsy
HARDIE ASSOCIATES CONSULTING ENGINEERS New York, NY
HVAC Designer 1993 - 1995
Responsible for designing and redesigning ductwork from existing HVAC units using
AutoCAD 12, 13 and 14
Overseeing job surveys and projects with such clients as Fitterman Hall and Harlem
Hospital (the new extended building)
EDUCATION:

MECHANIC INSTITUTE
New York, N.Y.
Diploma in HVAC Design and Mechanical Drafting.
Community Bronx College
Bronx, New York

ADDITIONAL INFORMATION:
Twenty years experience with HVAC Drafting, AutoCAD Design during my employment with Cosentini Associates (New York, NY) from 1973 to 1993
Skills (2) Rating
CAD
Engineering